Convex Tongue And Groove Panels

Convex Tongue and Groove Fence Panels

These attractive fence panels are a variation on our standard Tongue and Groove Effect panel, with the addition of a graceful arched top in a choice of 1.52m and 1.83m heights and are a mainstay of our premium range. Supplied in the natural Jakcure® finish. We have a range of finials to fit on the Jakposts that will add the finishing touch.

Specifications:

• These fence panels are fully framed with 50mm top and bottom rail and 45mm side rails.
• Panel thickness is 51mm - Please Note that the dimensions of components may increase by 6% when first delivered as our treatment process can temporarily cause the product to swell.
• Panels are available in two heights from 1.52m to 1.83m 
• Infilled with Tongue & Groove effect boards
• Support rails of 70mm
• All timber used throughout is superior quality Jakcure® treated softwood guaranteed for a minimum 25-years
• Stainless steel fixings used throughout for longer life
• Matching Brabourne garden gates and flat top Brook gates also available
• Courtyard gates also work well with this style fence
• To meet the conditions of the 25-year Jakcure® guarantee, gravel boards are required where panels are in contact with the ground 

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

If you require a non standard width panel e.g. to complete your fence run you would need 5 ½ panels, add a cut down kit to your basket in order to be able to cut the panel to the required size. Alternatively, please give us a call to speak to us about ordering a bespoke panel.

For more information on the matching Convex Trellis Topper panel please see the links below 

Convex Topper for Tongue and Groove Convex Panels

Our Tongue & Groove panels match both Courtyard gates and Brook garden gates. Click on the buttons below:

Courtyard Gates Matching Brook Boarded Gates

More on Components including End Frame Pieces for cutting panels down

Gravel boards need to be used when panels are in contact with the ground as part of the 25 year Jakcure guarentee conditions. More details of this can be found on our Jakcure T&C's page 

Gravel Boards

 If you are installing the product yourself, view our instructions below:

Installing Panel Fencing Instructions

Installing Timber Fence Post Instructions

Document Downloads

• Panel fence instructions
• How to reduce the width of Jacksons Fencing Panels
• Tonge and Groove Convex Panel Spec Sheet
• Q40 - Tongue and Groove Panel - Convex Top