Urban Fencing Panels

Urban Fence Panels

Combining wide and narrow timber pales, Urban is a contemporary panel with a distinctive design, ideal for a variety of applications. Mortice and tennoned for extra strength, these panels are planed all round for a smooth finish, with stainless steel fixings throughout to ensure a long life.

The panel looks similar on both sides with no rails. 

This panel can be easily rotated and installed so the timber pales run vertically. 

If a panel needs to be reduced in width at the end of a run, please use cut down kit code 634000K

If you need a narrower panel to complete your fence, it is fine to cut a panel to the correct size on site. Please remember to treat any cut ends with Jakcure Cut Treatment.

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

Capping Rails can be used on our Urban panels. Use the buttons below to see our options

Capping Rails

Post Caps add the finishing touch to any fence, view the full range by clicking the button below

Post Caps

We offer a matching gate for this panel

Urban Garden Gates

This panel is part of our 'good both sides' range. View all our panels in the range below

Good Both Sides Range

Document Downloads

• Panel fence instructions
• How to reduce the width of Jacksons Fencing Panels
• Urban Panel Spec Sheet
• Q40 - Urban panel