Our other sites:
Slotted Fence Posts
Slotted Fence Posts
- Jakpost® slotted fence posts reduce damage caused by wind movement when panels are screwed to posts
- Designed for use with our fence panels
- No more frost damaged cracked or chipped concrete posts
- Easy to carry - lighter than concrete posts
- Environmentally friendly
- More supportive than square section posts
- Easier to erect than concrete posts
- Complete range of panels to slot in Jakposts
- Gravel boards, capping and finials available
- Heavy Duty post options
- Compare different fence posts here.
Delivery
WAS
EXC VAT
INC VAT
NOW
EXC VAT
INC VAT
Slotted Posts (Jakpost®) - panel fence posts
Our slotted Jakposts® are designed to work with all of our fencing panels from Jaktop and Palisade to Featherboard, and even our Premier Trellis panels.
All panels slot easily into position as shown here. And there are many other benefits of using Jakposts, as opposed to old fashioned square section posts:
- Jakposts reduce damage caused by wind movement when panels are screwed to posts
- No more frost damaged cracked or chipped concrete posts
- Easy to carry - lighter than concrete posts
- Environmentally friendly
- More supportive than square section posts
- Easier to erect than concrete posts
- Complete range of panels to slot in Jakposts
- Gravel boards, capping and finials available
- Heavy Duty post options
- Compare different fence posts here.
25-year Jakcure® guarantee:
Please note: Where possible, avoid cutting, drilling or notching any timber that will be in-ground, as per our 25 year Jakcure® terms and conditions. If occasional sections do have to be cut then Cut Treatment should be applied liberally.
We recommend that all posts should be set in concrete or using a post fix mix at a minimum 0.6m into the ground. Please ask for advice when sizing gate posts. Download Post Installation Instructions
Our timber Jakposts are renowned for their strength and longevity, however some batches of the product may show a disruption to the timber around the nails which is caused as the nail is driven into the posts. This is due to the variation in raw material and the force in which the nail is driven. If it does cause a visual upset, the timber around the nail can be trimmed with a sharp craft knife or be sanded lightly. This will not affect the structural integrity of the product, nor the 25 year guarantee.
Standard Jakpost®
- 100mm x 100mm nominal planed finish with two 54mm x 25mm slots for fence panels
Heavy Duty Jakpost®
- 120mm x 124mm nominal, planed finish with two 54mm x 25mm slots for fence panels
Angled Slotted Jakpost®
Our angled slotted Jakpost® has been designed to help those tricky fence runs. Not every garden or fence run is straight or every corner 90 degrees. Therefore, we have designed and manufactured an angled fence post allowing a change of direction between 30 to 45 degrees.
Useful Note 1:
54mm wide x 25mm deep slot is to allow a clearance on our 50mm wide panel framing.
Useful Note 2:
To accommodate for a change of direction in fence line for an angle not equal to 90 degrees you can use our Angled Slotted Jakpost which allows a change of direction between 30-45 degrees.
Useful Note 3:
When calculating total length of run of panel fencing on standard slotted posts add 1830mm for each panel plus 75mm per end and 50mm per intermediate post.
Useful Note 4:
Include Postcrete to give your posts proper support; we recommend using 3 bags per post for soft ground or exposed areas or 2 bags per post for hard ground or smaller panels, just add water to mix please use code 648070
Heavy Duty Slotted Fence Posts are available and should be used when the overall fence height is 2.0m and over, where there is the possibility of high wind load, or the fence is steeply stepped. Jakposts are ideal when adding trellis topping panels.
We recommend using 6 screws per panel or 12 per panel if using capping rails.
60mm Screws, Self-Drilling Countersunk Stainless Steel are available in pack of 100 or 200 to secure panels to posts,see codes:
The following table is a guide to help you to establish the correct post length and product code for different fence heights without Gravel Boards.
The following table is a guide to help you to establish the correct post length and product code for different fence heights with Gravel Boards.
Below shows the four types of slotted Jakpost® without capping in plan view:
1.Corner Fence Post includes a timber support battern
2.Intermediate Fence Post
3.End Fence Post
4.Angled Fence Post
809911 for pack 100 Torx head
Panel Height | Inter | End | Corner | HD Inter | HD End | HD Corner | Post Length |
0.75m/0.9m | 667200 | 668200 | 667220 | 1.5m | |||
1.05m/1.2m | 667300 | 668300 | 667330 | 1.8m | |||
1.4m/1.5m | 667400 | 668400 | 667440 | 2.1m | |||
1.65m/1.85m | 667500 | 668500 | 667550 | 2.4m | |||
2.0/2.1m | 667800 | 668800 | 667880 | 669000 | 669011 | 669010 | 2.7m |
Above 2.1m | Use Heavy Duty Slotted Fence Posts | ||||||
Panel Height | Height Including Gravel Board | Inter | End | Corner | HD Inter | HD End | HD Corner | Post Length | |
0.9m/1.05m | 1.05m/1.20m | 667300 | 668300 | 667330 | 1.8m | ||||
1.2m/1.35m | 1.35m/1.50m | 667400 | 668400 | 667440 | 2.1m | ||||
1.5m/1.65m | 1.65m/1.80m | 667500 | 668500 | 667550 | 2.4m | ||||
1.8m | 1.95m | 667800 | 668800 | 667880 | 669000 | 669011 | 669010 | 2.7 | |
Above 2.0m | Use Heavy Duty Slotted Fence Posts | ||||||||
If you are struggling to know which fence panel you require, use our fence post comparison tool to easily compare each post.
Heavy Duty versions of these slotted Jakpost® are also available, click below to explore.
Note: Don't forget capping rails.
Capping Rails 1.875m x 120mm x 25mm (667700) for use with Intermediate posts.
Capping Rails 1.925m x 120mm x 25mm (667772) for use with End/Corner posts.
Gravel Boards are 150mm high 25mm thick and 1.83m long use code (667600).
Explore our whole range of fence posts and accessories below.
If you a require a fence to have a corner but not as sharp as 90 degrees, usually two end posts are installed back to back as shown in the image
Document Downloads
Approved Installers Network
Our network of Approved Installers are high skilled, carefully selected, reputable fence installers who we trust to install our high quality timber products to the highest installation standards. If you are interested in installation by one of our Approved Installers please click "Add installation to basket" below. We will be in touch shortly after processing your order to discuss installation.
Products in Slotted Fence Posts
Just update the quantities of each item you wish to buy and click 'Add all to basket'
Just update the quantities of each item you wish to buy and click 'Add all to basket'
Related Products
Find related products for your order. If you cannot find the item you are looking for, please do not hesitate to call our friendly sales team.
Shopping with us
We offer the longest guarantee in the industry for manufactured timber products.
Established for over 75 years, our staff are ready to help with a wealth of knowledge and expertise
Find out more
Find out more about our market leading 25 year guarantees for service and timber treatment
Read more
Use our online tools to plan and price your Fencing, Gate or Decking project.
Get StartedFeatherboard Fence Calculator
Enter the run length and height, to calculate the items required:
You will need bays consisting of posts, pales, rails and Gravelboard(s).
Top