Post infill Piece for Deck Balustrade, Mi-T end Post and Slotted Posts when stepping a fence (also used for Pergola Attachment)#
Slotted post infill Piece (2m 53x24mm) for Deck Balustrade Posts, Mi-T post end infill and commonly used when stepping a fence (see image). You will need one infill piece (2m x 50mm x 25mm) per section this will need to be cut to size, this fills the slot in the slotted post.
For use with Slotted Posts
Adding an infill piece hides the post slot that would otherwise be visible, allowing for a neater finish. This is common when a fence steps or when our slotted posts are used with balustrade panels.
For use with Mi-T Posts
The infill piece is also required when a Mi-T Post is installed at the end of a fence run. It fills half of the 'T' post creating a neat finish.
Where possible, avoid cutting, drilling or notching any timber that will be in-ground, as per our 25 year Jakcure® terms and conditions. If occasional sections do have to be cut then Cut Treatment should be applied liberally.