Pointed Palisade Pales Fence Panels

Pointed Palisade Pales Fence Panels

About the panel

Pointed palisade panels are a traditional picket fence design. Made using pointed pales this panel is an alternative design to rounded pale palisade fencing. .

Panel Specification

Our Pointed Top Palisade fence panels are made using our trademark vacuum pressure treated Jakcure® softwood timber, guaranteed for 25 years. Constructed using stainless steel fixings, our fence panels are built to last.

• All panels are 1.83m wide
• Pales are 22mm x 75mm
• Pales are 19mm thick
• Each panel is backed by two 2ex 100 x 38mm cant rails. Cant is the difference in elevation (height) between the two edges. Water will run off the rail.
• The fence should be erected 50mm above ground level to prevent panel from touching the ground
• Gravel boards do not need to be used if panels are installed 50mm from the ground and there is no ground contact .

Please Note: dimensions may increase by 6% when first delivered as our treatment process can temporarily cause the product to swell.

Fence Post Options – Standard Slotted Jakpost®, Heavy Duty Slotted Jakposts®

​Installation Advice - Installation Instructions ​

Reducing the width of the fence panel – All fence panel are 1.83m wide as standard, if you require a narrower fence panel, you can cut the fence panel down on site using our cut down kit. Please remember to treat any cut ends with Jakcure Cut Treatment, to ensure you adhere to our 25-year guarantee guidelines.

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

There are two styles of Palisade fencing - traditional, and panel form which is shown on this page. Traditional palisade is when the fence is constructed onsite by manually attaching the rails to the posts and then each pale to the rails.

Traditional Pointed Palisade Fencing

Take a look at our Pointed Palisade Gates that match these Palisade Fence Panels perfectly

Pointed Palisade Gates

Explore our wider range of fence panels here

Fence Panels 

View our full range of palisade products

Palisade

Gravel boards need to be used when panels are in contact with the ground as part of the 25 year Jakcure® guarantee. More details can be found on our Jakcure T&C's page.

Gravel Boards

The fence should be erected 50mm above ground level to allow for weeding or used with a gravel board

If you are installing the product yourself, view our instructions below:

Installing Panel Fencing Instructions

Installing Timber Fence Post Instructions

Document Downloads

• Q40 - Palisade Panel - Pointed Tops
• Palisade Panel - Pointed Top Spec Sheet
• Palisade Panels Flat Top - 1200m to 1800m Height - J701245sht2
• Palisade Panels Flat Top - upto 1200mm Height - J701245sht1
• Palisade Single Gate - TALL - Level Top - J702122sht1
• Palisade Single Gate - SHORT - Level Top - J702122sht3
• Palisade Double Gate - SHORT - Level Top - J702122sht4
• Palisade Double Gate - TALL - Level Top - J702122sht2